Контролери за DC четкови мотори

DC Series/PM/Sep-Ex Controller(12V-120V)

Контролери за DC четкови мотори






















Features:

•Intelligence with powerful microprocessor.
•Synchronous rectification, ultra low drop, and fast PWM to achieve very high efficiency.
•Voltage monitoring on voltage source 12V and 5V.
•Hardware over current protection.
•Hardware over voltage protection.
•Current limit and torque control.
•Low EMC.
•LED fault code.
•Battery protection: current cutback, warning and shutdown at configurable high and low battery voltage.
•Rugged aluminum housing for maximum heat dissipation and harsh environment.
•Rugged high current terminals, and rugged aviation connectors for small signal.
•Thermal protection: current cut back, warning and shutdown on high temperature.
•Configuring current-voltage mode of field function on controller with field to achieve more reliable.
•Configurable high pedal protection: Disable operation if power up with high throttle.
•Brake switch is used to start regen.
•0-5V or 0-5K brake signal is used to command regen current.
•Provide 12V output power.
•Capable of detecting short-circuit fault in the main contactor at power on.
•Easy installation: 1-4V "Hall Active" throttle, or 0-5K or 0-5V potentiometer(<100K) can work.
•Standard PC/Laptop computer to do programming. No special tools needed.
•User program provided. Easy to use. No cost to customers.

General Specifications:
• Frequency of Operation: 16.6 KHz.
• Standby Battery Current: < 0.5mA.
• Controller power supply current, PWR, <150mA.
• Configurable battery voltage range, B+. Max operating range: 8V to 30V.
• Standard Throttle Input: 0-5K(2-wire resistive pot), 0-5V (3-wire resistive pot), 1-4V (hall active throttle).
• Analog Brake and Throttle Input: 0-5V or 0-5K.
• Reverse Alarm, Main Contactor Coil Driver, Meter.
• Full Power Operating Temperature Range: 0℃ to 50 ℃ (controller case temperature).
• Operating Temperature Range: -30℃ to 90 ℃, 100C shutdown (controller case temperature).
• Motor Current Limit, 1 minute: 400A.
• Motor Current Limit, continuous: 160A.

Optional Features:
Optional Waterproof







Контролери за DC четкови мотори

Oисание:

24-120V,160A/400A макс.

• Опто-изолиран.
• Мощен процесор
• Висока ефективност.
• Мониторинг на напрежение 12V и 5V източници.
• Алуминиев корпус за максимално охлаждане.
• LED код - различните комбинации от примигване указват състоянието.
• Защита от резки стартове. Прекратяване на операцията при подаване на газ до край.
• Защита на батериите:Ограничаване на изходящия ток .Изключване при нисък волтаж.
• Температурна защита.
• Конфигуриране на параметрите.
• Ключ спирачка за регенерация.
Не са необходими специални инструменти за връзка с PC, при програмиране .

 
• Водоустойчиво изъплнение при желание .


Обща спецификация:

• Честота на работа: 16.6kHz.
Режим на готовност : <0,5 mA.
• Диапазон на захранващото напрежение, PWR, от 8 до 30V.
• Консумация, 200mA @ 12V, 2.5W.
•Напрежението на батерите с които оперира, Б +, Максимален диапазон: 18V до 136V.
• Аналогова спирачката и вход на регулатора: 0-5 волта сигнал с 3-жичен потенциометър.
• Reverse Alarm, Main Contactor Coil Driver, Meter. • Reverse Аларма, основен двигател Контактор Coil, метър.
• Full Power Temperature Range: 0℃ to 40℃ (controller case temperature). • Пълна мощност Температура: 0 ℃ до 40 ℃ (контрольор при температура).
• Operating Temperature Range: -30℃ to 90℃, 100℃ shutdown (controller case temperature). • Работна температура: -30 ℃ до 90 ℃, 100 ℃ изключване (температурен контролер случай).
• Motor Current Limit,10 seconds boost: 400A • Motor сегашната граница, 10 секунди тласък: 400A
• Motor Current Limit, 1 minutes: 300A • Motor сегашната граница, 1 минута: 300A
• Motor Current Limit, continuous: 160A • Motor сегашната граница, непрекъснато: 160A


В момента разглеждате олекотената мобилна версия на уебсайта. Към пълната версия.